No WLAN is generated by the WebBoat 4G lite

[Thorsten]

#2877

After one year of trouble-free operation, no WLAN is generated by the WebBoat 4G lite. When powering up, the power on LED is on, all 5 cellular signal strength LEDs are on, the 3 LEDs between the two are flashing differently. After a while the power-on LED is on, of the three only the right LED flashes, the signal strength of the mobile network is displayed (e.g. 3 LEDs). But no WLAN with the name webboat_XXXX is established. A factory reset brought no changes. Access via the app is also not possible. The antenna cable to the WLAN antenna is o.k. No short circuit. What could be the solution to solve this problem? Thanks in advance, best regards, Thorsten.

[glomexadmin]

#2879

Have you tryed to press the reset button for 10/12 second with the unit powered?
Do you ahve the possibility to connect a computer via lan cable to the unit?
Default IP address is: 192.168.81.1

[Thorsten]

#2896

A factory reset has already been performed. A LAN cable is connected, the GLOMEX cannot be reached via the IP address.

[glomexadmin]

#2907

You can see some led blinking on the router?

[Author]

Posts